Bar + Mesh Support Chairs

(Continuous Deck Chair)

BACK TO COMPLETE RANGE

The plastic Deck Rail is a continuous spacer for formwork applications, designed with pairs of vertical legs at approximately 75mm centres and an additional leg central. The 1100mm length is designed to be snapped in half to create two 550mm long sections, or moulded into other lengths as noted below. The Deck Rail is one of the most versatile spacers that is strong and stable while providing minimum exposure. The male to female clip-in connection at opposing ends allows for joining of continuous lengths, or can be used individually. Deck Rails eliminate the need to clip bar chairs onto the reinforcement as well as ‘chairing-up’ after reinforcement has been laid. Ideal for suspended decks, precast or tilt-up panels, exposed in-situ elements, precast beams and slabs on blinding concrete. Available in heights from 20mm to 75mm in 5mm increments. Note: Where there are concentrated loads; the 1,100mm long Deck Rail can be joined end on end (male to female) to form a circle of approximately 350mm diameter to the support bar.

Continuous Deck Chair

  • Code CDR020
    Description 20mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 1600
  • Code CDR025
    Description 25mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 1600
  • Code CDR030
    Description 30mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 1400
  • Code CDR035
    Description 35mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 1200
  • Code CDR040
    Description 40mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 1100
  • Code CDR045
    Description 45mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 1000
  • Code CDR050
    Description 50mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 900
  • Code CDR055
    Description 55mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 900
  • Code CDR060
    Description 60mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 800
  • Code CDR065
    Description 65mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 700
  • Code CDR070
    Description 70mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 600
  • Code CDR075
    Description 75mm x 1100mm long (interconnecting) formwork chair
    Pack 20
    Pallet 600

Product held in stock is moulded in a light grey colour, however we can mould in white, black and other colours, subject to minimum order requirements. All sizes can be moulded in lengths of 350, 500, 800, subject to minimum order requirements.

For more information on this product, get in touch.