Designed for lifting concrete tilt-up wall panels via the near face, this lifter assembly (housing an internal foot anchor), provides for easy post-cast extraction of the split-halves of the plastic void former. Supplied assembled in sturdy galvanised steel and accommodates antennae for location detection. The quick Ground Release Clutch is used in conjunction with the Face Lifter, reducing the need for ladders.
The top label references the panel thickness and correct direction of the plastic void former recess, in relation to the top and bottom of the panel. The hot forged anchor, permits rapid hardware attachment, with a smooth rotation of the clutch during the release operation.
WLL safety factor ~2.25:1 @ 25Mpa WLL ratings for the 150mm is based on a 120mm long foot anchor. The 175mm and 200mm ratings are based on 144mm long foot anchors.
*Ground Release Lifting Clutches may also be Hired. Ask one of our staff for assistance. Complies with the requirements of AS3850.2015 CAUTION: Do Not use the FLS for edge-lifting of panels as the insert is not designed for such use. Do Not use with top seeded exposed aggregate 19mm or larger as aggregate will pop out during erection resulting in a reduced insert WLL.