Trench Mesh Support

The Trench Mesh Support has been designed with the clip-on at both sides, to allow the support to be fitted prior to lowering the mesh into the trench. A non clip-on support in the middle allows for tolerances in the main wire spacing of the trench mesh. The maximum width of 290mm avoids interference with the sides of narrow trenches. This secure support can accommodate 8, 11, and 12mm bar or mesh, with 60mm bottom cover. Ideal for residential applications such as strip footings, foundations and raft slabs.

Trench Mesh supports are not designed for foot traffic.

An alternative three clip support to suit loose N16 bars is also available.

Trench Mesh Support
  •  
  • Trench Mesh Support

    TRENCHMESH

    Suits 8mm, 11mm &12mm Trenchmesh - 60mm.

    Unit Type
    Add to Favorites